Conditionnement : 1g
Téléphone : +1 850 650 7790
Synonyms: Natural Black 1, Hydroxybrazilin, Haematoxylin
| Description | Hematoxylin (Natural Black 1) is a dye obtained from the heartwood of logwood (Haematoxylon campechianum Linn., Leguminosae) used as a stain in microscopy and in the manufacture of ink. |
| Targets & IC50 | β-Amyloid (1-42) fibrillogenesis:1.6 µM (IC50) |
| In vivo | Hematoxylin and eosin staining is one of the most commonly used histological staining methods. Hematoxylin (Hydroxybrazilin) is a compound that forms strongly colored complexes with certain metal ions, especially with Fe(III) and Al(III) salts, and acts as a histological stain. |
| Synonyms | Natural Black 1, Hydroxybrazilin, Haematoxylin |
| Molecular Weight | 302.28 |
| Formula | C16H14O6 |
| Cas No. | 517-28-2 |
| Smiles | O[C@]12[C@](C=3C(C1)=CC(O)=C(O)C3)(C=4C(OC2)=C(O)C(O)=CC4)21 |
| Relative Density. | 1.709 g/cm3 |
| Storage | Keep away from direct sunlight,Store under nitrogen Powder: -20°C for 3 years | In solvent: -80°C for 1 year Shipping with blue ice/Shipping at ambient temperature. | |||||||||||||||||||||||||||||||||||
| Solubility Information | DMSO: 83.33 mg/mL (275.67 mM), Sonication is recommended.  Ethanol: 57 mg/mL (188.57 mM), Sonication is recommended. H2O: 56 mg/mL (185.26 mM), Sonication is recommended. | |||||||||||||||||||||||||||||||||||
| In Vivo Formulation | 10% DMSO+40% PEG300+5% Tween 80+45% Saline: 2 mg/mL (6.62 mM), Sonication is recommended. 10% DMSO+90% Saline: 8.33 mg/mL (27.56 mM), Solution. Please add the solvents sequentially, clarifying the solution as much as possible before adding the next one. Dissolve by heating and/or sonication if necessary. Working solution is recommended to be prepared and used immediately. The formulation provided above is for reference purposes only. In vivo formulations may vary and should be modified based on specific experimental conditions. | |||||||||||||||||||||||||||||||||||
Solution Preparation Table | ||||||||||||||||||||||||||||||||||||
H2O/Ethanol/DMSO
Note : The dilution table applies only to solid products. For liquid products, please calculate the stock solution based on the stated concentration and/or density. | ||||||||||||||||||||||||||||||||||||
For example, if the intended dosage is 10 mg/kg for animals weighing 20 g , with a dosing volume of 100 μL per animal, and a total of 10 animals are to be administered, using a formulation of 
10% DMSO+ 40% PEG300+ 5% Tween 80+ 45% Saline/PBS/ddH2O , the resulting working solution concentration would be 2 mg/mL.Dissolve 2 mg of the compound in 100 μL DMSO to obtain a stock solution at a concentration of 20 mg/mL . If the required concentration exceeds the compound's known solubility, please contact us for technical support before proceeding.
1) Add 100 μL of the DMSO stock solution to 400 µL PEG300 and mix thoroughly until the solution becomes clear.
2) Add 50 µL Tween 80 and mix well until fully clarified.
3) Add 450 µL Saline,PBS or ddH2O and mix thoroughly until a homogeneous solution is obtained.
| Size | Quantity | Unit Price | Amount | Operation |
|---|
